ClamCleat CL211MK2AN Racing Micro Hard Anodised Thru Tube Sheave Plate

The Clamcleat® CL835 is designed to take the rope from inside the tube to outside and to cleat it off using either CL211MK2 or Nylon CL272 cleats. Holds 3-6mm (1/8"-1/4") ropes. Maximum load 150kg (300lb).

Ideal for use with sunshades and flag poles. The sheave keeps the rope from coming into contact with the fixings and will allow the rope to travel is the same direction as the cleat or at 180 degrees. The plate housing is designed to ensure a tidy finish even if the hole cut in the tube is slightly over size. See the Downloads tab for a cutting diagram that you can print and use as a cutting template.  Please contact us if you would like a DXF file for NC machining.

The CL835CCAN/R single retail card is comes complete with CL835 sheave plate, CL211 Mk2AN hard anodised cleat, insulators and 2 screws. Everything you need to fit the sheave plate & cleat to a tube or flat surface. The blue card can also be used as a cutting template.